Public Meeting - US 380 Collin County Feasibility Study from Denton County Line to Hunt County Line
Independence High School Cafeteria
10555 Independence Parkway
Frisco, TX 75035 (Map)
Thursday, Oct. 4, 2018
6 p.m. - 8 p.m.
The purpose of the study is to analyze potential roadway options for US 380, including improving the existing alignment or utilizing a new alignment. Alignment options could require additional right of way to accommodate the project.
The proposed project is a feasibility study for improvements to US 380 through Collin County, a distance of approximately 32 miles. TxDOT will conduct three public meetings to discuss and receive public comments on the proposed project. All three meetings will present the same information and will be held in an open house format with a formal presentation beginning at 7 p.m. Study data and maps will be available for viewing at the public meetings. Representatives from TxDOT and project consultants will be available to answer questions. Meeting information will also be available at www.Drive380.com. Comments must be received on or before Friday, Oct. 26, 2018, to be a part of the official record.
TxDOT makes every reasonable effort to accommodate the needs of the public. The open house will be in English. If you have a special communication accommodation or need for an interpreter, a request can be made. If you have a disability and need assistance, special arrangements can also be made to accommodate most needs. Please call (214) 320-4480 at least two working days prior to the meeting. Please be aware that advance notice is requested as some accommodations may require time for TxDOT to arrange.
Memorandum of Understanding:
The environmental review, consultation, and other actions required by applicable federal environmental laws for this project are being, or have been, carried-out by TxDOT pursuant to 23 U.S.C. 327 and a Memorandum of Understanding dated December 16, 2014, and executed by FHWA and TxDOT.
TxDOT Dallas District
Public Information Office
Posted Sept. 7, 2018