Height of Signs and Sign Assemblies
Figures 4-15 through 4-22 on the following pages illustrate typical sign height situations. Section 2A.18 and Figure 2A-2 of the 2011 Texas MUTCD describe the height placement requirements for signs.
Figure 4-15. Sign Height on Front Slope
Figure 4-16. Sign Height on Back Slope
Figure 4-17. Sign Height for Installations with a Supplemental Plaque or Flashing Beacon
Figure 4-18. Sign Height on Curb and Gutter or Raised Island
Figure 4-19. Sign Height for Large Sign with Two or More Posts
Figure 4-20. Sign Height between Main Lanes and Frontage Roads
Figure 4-21. Sign Height for Texas Reference Marker Assembly
Figure 4-22. Sign Height for Reference Location Signs and Chevron Signs