Placement of Non-Breakaway Poles
Generally, non-breakaway roadway lighting poles may be used
on the house side of roadways when placed outside of the clear zone
or inside the clear zone when protected from impact.
Non-breakaway poles should be placed as close to the right-of-way
line as lighting design and practicality permit. Wherever possible,
non-breakaway poles should be placed among other nonyielding structures
to minimize the hazard.
If non-breakaway poles are used and are not protected, the
poles must be outside the clear zone and as close to the right-of-way
line as possible subject to good lighting design practice.
Non-breakaway poles mounted behind metal beam guard fence
should be placed at least 2.5 feet behind the guard fence
to
allow for deflection of the guard fence if hit
.Joint usage of poles is encouraged to reduce roadside clutter
and the number of fixed objects along the roadside. When lighting
is provided at signalized intersections and when conditions permit,
the luminaires should be mounted on the traffic signal pole. Note
that luminaires mounted on traffic signal poles should be powered
from the signal electrical service.
Luminaires mounted on traffic signal poles should be oriented
perpendicular to the centerline of the roadway being lighted.