Track Panels
Panels are typically 80
foot
in length
and include:- Rails.
- Tie plates.
- Ties.
Track panels are particularly useful when replanking an existing
at-grade crossing. After the existing rails are cut on both ends,
an existing section of track is removed down to the subgrade. After the
subgrade, subballast, and ballast are
placed
,
the track panels are installed. The track panel is bolted on both
ends, and a tamping machine installs ballast. The temporary joint
bars are then removed, and the rails are welded together. Crossing
surface panels are bolted into the ties.