Required Documents
Below is a list of required documents that may be needed for
design approval
and/or
for the C&M Agreement:- Overpass (new or modification):
- Exhibit A,30% or more PS&E.
- Exhibit B, 100% Plans.
- Railroad Scope of Work (RR SOW).
- Design Conformance to Railroad Guidelines (DCRG) Report, if applicable.
- Metes and bounds property descriptionor area map.
- Boring logs,if applicable.
- 5% theoretical cost estimate,if applicable.
- Hydraulic analysis,if applicable.
- Overhead checklist (CPKCprojects only).
- Railroad Work Matrix,if applicable.
- Underpass (new or modification):
- All items for overpass required documentation.
- Typical Selection Report (TSR),if applicable.
- Cooper E-80 loading calculations,if applicable.
- Shoofly track design.
- At grade crossing (new or modification):
- Exhibit A,30% or more PS&E / Railroad Scope of Work (RR SOW).
- Metes and bounds property descriptionor area map.
- Railroad Work Matrix,if applicable.
- Traffic signal preemption:
- Exhibit A,30% or more PS&E.
- Preemption Form (TxDOT Form 2304).
- Traffic signal timing dataand phasing diagram.
- Signed preemption request.
- Culverts, drainage pipes, or conduits on or over railroad right of way:
- Exhibit A,30% or more PS&E.
- Pipeline or wireline license request form.
- Hydraulic analysis,if applicable.
- Cooper E-80 loading calculations,if applicable.
- Railroad Work Matrix,if applicable.
- Jointusage (ditch, sidewalk, etc.) or longitudinal encroachments:
- Exhibit A,30% or more PS&E.
- Hydraulic analysis,if applicable.
- Railroad Work Matrix,if applicable.