Section 2: Code Listing

ASPHALT RAKER – code 9106

Maximum
training time: 13 weeks or 520 hours

Code 9106
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of placement of materials, 5 hours Perform duties of asphalt raker, 35 hours	50
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Adjustment of screed to regulate width and depth of material, 35 hours Distribution of material, 380 hours	425
	Total	520

BATCHING PLANT OPERATOR, ASPHALT - code 9112

Maximum
training time: 18 weeks or 720 hours

Code 9112
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of equipment in operation, 35 hours Adjustment of scales, operation of controls and weighing, 50 hours	95
2	Care and Maintenance Safety procedures, 10 hours Routine cleaning, lubrication and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Operating controls and scales for measurement and discharge of asphaltic materials into trucks, or carriers, 570 hours	580
	Total	720

BATCHING PLANT OPERATOR, CONCRETE – code 9115

Maximum
training time: 18 weeks or 720 hours

Code 9115
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of equipment in operation, 35 hours Adjustment of scales, operation of controls and weighing , 50 hours	95
2	Care and Maintenance Safety procedures, 10 hours Routine cleaning, lubrication and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Operating controls and scales for measurement and discharge of asphaltic materials into trucks, or carriers, 570 hours	580
	Total	720

CONCRETE FINISHER, PAVING AND STRUCTURES – code 9124

Maximum
training time: 26 weeks or 1040 hours

Code 9124
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of use of machine in operation, 25 hours Starting and manipulating controls for moving equipment and attachments , 25 hours Observation of use of straight edges and steel trowels , 25 hours Observation of forming a finishing of edges and joints, 25 hours	110
2	Care and Maintenance Safety procedures, 10 hours Routine cleaning work area and materials, holding materials, tools and handling canvas belting or burlap strips, 200 hours Routine fueling, lubricating and servicing, 35 hours	245
3	Operation of Equipment Safe operating procedures , 10 hours Basic operation of tools and machine , 165 hours Use of straight edges, trowels, or floats, 100 hours Forming and finishing edges, joints, curbs and gutters, 200 hours Operation of finishing machine , 210 hours	685
	Total	1040

ELECTRICIAN* – code 9139

Maximum
training time: 104 weeks or 4160 hours; *Two training credits will be counted for graduation in this classification

Code 9139
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Basic rules of National Electrical Code, 100 hours Basic tools – their care and uses, 100 hours	210
2	Technical Studies and Review Safety procedures, 10 hours Advance study of National Electrical Code, 100 hours Construction blueprints, reading and application, 200 hours	310
3	Applied Techniques of Electrical Construction Safety procedures, 10 hours Care and Maintenance of trade tools and equipment, 100 hours Wire ways – types, uses and methods of installation, 900 hours Circuit wiring, 800 hours Protective equipment – switches, panels, etc., 300 hours Feeders and services , 300 hours Lighting fixtures and wall outlets, 250 hours Control wiring, 150 hours Testing of completed work, 100 hours Underground conduit and wire, 300 hours Installation of outside lighting, maintenance and repairs, 430 hours	3640
	Total	4160

TELECOMMUNICATION TECHNICIAN* – code 9143

Maximum
training time: 52 weeks or 2080 hours *Two training credits will be counted for graduation in this classification

Code 9143
Step	Process	Hours
1	Orientation Safety procedures, 10 hours Theories and types of telecommunications systems, 40 hours Operation of specialized tools and equipment, 40 hours Familiarization with standards and practices, 40 hours	130
2	Basic Design Familiarity Safety procedures, 10 hours Understanding and interpretation of specifications, 20 hours Blueprint or construction plans reading, 50 hours	80
3	Applied Techniques of Telecommunications Construction Safety procedures, 10 hours Care and maintenance of trade tools and equipment, 60 hours Handling and installation of copper cables, 300 hours Handling and installation of fiber cables, 400 hours Termination and testing of copper cables, 300 hours Termination and testing of fiber cables, 250 hours Installation and deployment of telecommunications equipment, 250 hours Operational testing and troubleshooting of systems, 250 hours Documentation of tests and installations, 50 hours	1870
	Total	2080

COMMUNICATIONS CABLE INSTALLER – code 9144

Maximum
training time: 18 weeks or 720 hours

Code 9144
Step	Process	Hours
1	Orientation Safety procedures, 10 hours Theories and types of Telecommunications systems, 5 hours Operation of specialized tools and equipment, 25 hours Familiarization with standards and practices, 25 hours	65
2	Basic Design Familiarity Safety procedures, 10 hours Understanding and interpretation of specifications, 20 hours Blueprint or Construction Plans Reading, 45 hours	75
3	Applied Techniques of Cable Installation Safety procedures, 10 hours Care and maintenance of trade tools and equipment, 70 hours Handling and installation of copper cables, 100 hours Handling and installation of fiber cables, 200 hours Figure 8 techniques and long pulls, 100 hours Handling and installation of innerduct, 100 hours	580
	Total	720

TRAFFIC SIGNAL/LIGHT POLE WORKER* – code 9145

Maximum
training time: 104 weeks or 4160 hours *Two training credits will be counted for graduation in this classification

Code 9145
Step	Process	Hours
1	Orientation Safety procedures, 10 hours Basic rules of National Electrical Code, 100 hours Basic tools – their care and uses, 100 hours	210
2	Technical Studies and Review Safety procedures, 10 hours Advance study of National Electrical Code, 100 hours Construction blueprints, reading and application, 200 hours	310
3	Applied Techniques of Electrical Construction Safety procedures, 10 hours Care and maintenance of trade tools and equipment, 100 hours Wire ways – types, uses and methods of installation, 900 hours Circuit wiring, 800 hours Protective equipment – switches, panels, etc., 300 hours Feeders and services, 300 hours Lighting fixtures and wall outlets, 250 hours Control wiring, 150 hours Testing of completed work, 130 hours Underground conduit and wire, 300 hours Installation of outside lighting, maintenance and repairs, 400 hours	3640
	Total	4160

FORM BUILDER/SETTER, STRUCTURES – code 9151

Maximum
training time: 26 weeks or 1040 hours

Code 9151
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Materials and tools selection, 15 hours Placing forms, form stripping and setting of precast concrete, 20 hours	45
2	Applied techniques Safety procedures, 10 hours Blueprint or construction plans reading and application, 30 hours Basic form design, 30 hours Formwork: pier, pile and cap formwork; decking formwork; endwall formwork; box culverts, inlets and headwall formwork, parapet and hand railing formwork, 225 hours Stripping and salvage of forms for reuse and cleaning work area, 30 hours	325
3	Actual Operation of Form Setting Safe operating procedures, 10 hours Align forms. Drive stakes for braces and erect scaffolding, 100 hours Observe and assist in setting precast concrete, 25 hours Measure space between forms, fit together, line, plumb vertically, set to elevation, 250 hours Check forms while concrete is being poured, 285 hours	670
	Total	1040

FORM SETTER, PAVING AND CURB – code 9160

Maximum
training time: 18 weeks or 720 hours

Code 9160
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of setting grade line, 20 hours Observation of pulling, loading, hauling and placing forms, 30 hours	60
2	Care and Maintenance Safety procedures, 10 hours Routine cleaning of forms and care of air and hand tools, 25 hours	35
3	Actual Operation of Form Setting Safe operating procedures, 10 hours Set grade line, 70 hours Pull, load, haul and place forms, 100 hours Set forms to finish grade, drive pins, set and check alignment, and spray forms, 375 hours Check forms while pouring concrete, 70 hours	625
	Total	720

LABOR, UTILITY – code 9175

Maximum
training time: 13 weeks or 520 hours

Code 9175
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of tools and machines, 20 hours	30
2	Care and Maintenance Safety procedures, 10 hours Care of power and air tools, 15 hours Erosion control, 20 hours Dewatering systems, 20 hours	65
3	Actual Operation of Equipment Safe operating procedures, 10 hours Erect shoring and bracing, 75 hours Pipe installation, 75 hours Equipment operator assistance: position machines, verify grades, signal operator to dumping positions, 115 hours Assist in placing and tying reinforcing steel, 75 hours Unload and transport material, 75 hours	425
	Total	520

MECHANIC – code 9187

Maximum
training time: 36 weeks or 1440 hours

Code 9187
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Cleaning, disassembling and inspection of engine parts, 40 hours Installation and adjustment of minor parts, 50 hours	100
2	Care and Maintenance Safety procedures, 10 hours Engine reconditioning, 200 hours Clutch installation, 50 hours Transmission reconditioning, 100 hours	360
3	Actual Repair of Equipment Safe operating procedures, 10 hours Electrical systems, 200 hours Hydraulic systems, 200 hours Final drive and track assemblies, 150 hours Welding and fabrication, 100 hours General field maintenance, 320 hours	980
	Total	1440

SERVICER – code 9194

Maximum
training time: 13 weeks or 520 hours

Code 9194
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observing fueling, greasing and cleaning filters, 40 hours Fuel and grease used for different types of equipment, 40 hours	90
2	Actual Operation Safe operating procedures, 10 hours Servicing all types of equipment, 80 hours Installation and adjustment of minor parts, 80 hours General field maintenance and operation of service truck, 260 hours	430
	Total	520

PAINTER, STRUCTURES – code 9196

(May also require SSPC QP 1 or QP 2 certification)

Maximum
training time: 26 weeks or 1040 hours

Code 9196
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Operate maintain and load equipment, 40 hours Product and work orientation, 50 hours	100
2	Care and Maintenance Safety procedures, 10 hours Equipment maintenance and cleanup, 60 hours	70
3	Actual Operation of Equipment Safe operating procedures, 10 hours Brushing and rolling, 100 hours Material training, 50 hours Hazardous materials, 200 hours Sandblasting, 200 hours Spraying, 310 hours	870
	Total	1040

PILEDRIVER – code 9202

Maximum
training time: 18 weeks or 720 hours

Code 9202
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 50 hours Starting and manipulating controls for moving equipment and attachments, 45 hours	105
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Basic operation of crane or pile driving rig in hoisting and moving, 200 hours Placement of pile in preparation for driving, 140 hours Seating of pile hammer on pile in preparation for driving, 120 hours Driving of pile, 100 hours	570
	Total	720

PIPELAYER - code 9205

Maximum
training time: 13 weeks or 520 hours

Code 9205
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of spade operation and laying of pipe, 20 hours Study of various types of pipe and related materials, 5 hours	35
2	Care and Maintenance Safety procedures, 10 hours Ditch preparation, handle materials and tools, 20 hours	30
3	Actual Handling of Pipe and Spade Safe operating procedures, 10 hours Ditch grading with compressed air driven or hand spade, 50 hours Handle materials, assist in lowering pipe, 50 hours Work with pipe layer in laying all types of pipe and duct. Adjust pipe to elevation insert spigot end of pipe into bell end of last laid pipe, 345 hours	455
	Total	520

BLASTER – code 9214

Maximum
training time: 26 weeks or 1040 hours

Code 9214
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of work of Powder man, 50 hours Assist Powder man by carrying explosives, placing in holes, connecting lead wires, 45 hours	105
2	Applied Techniques of Powder man Safety procedures, 15 hours Storage, transporting, placing and discharging of explosives, 330 hours	345
3	Actual Blasting Operations Safe operating procedures, 25 hours Use of detonators and explosives, 100 hours Storage, movement and placing of explosives, 300 hours Placing wires, detonators and explosives, tamping and discharging, 165 hours	590
	Total	1040

ASPHALT DISTRIBUTOR OPERATOR – code 9300

Maximum
training time: 26 weeks or 1040 hours

Code 9300
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of vehicle in operation, 35 hours Starting and manipulating valves and controls to distribute material and move equipment, 30 hours	75
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Regulates valves and levers to distribute oil or bituminous liquid for highway surfacing, 115 hours Operation of equipment, 795 hours	920
	Total	1040

ASPHALT PAVING MACHINE OPERATOR - code 9303

Maximum
training time: 26 weeks or 1040 hours

Code 9303
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operations, 35 hours Starting and manipulating controls for moving equipment and attachments, 30 hours	75
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safety operating procedures, 10 hours Observation of machine in operations, 120 hours Operating of machine, 790 hours	920
	Total	1040

BROOM OR SWEEPER OPERATOR – code 9305

Maximum
training time: 8 weeks or 320 hours

Code 9305
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 5 hours Starting and manipulating controls for moving equipment and attachments, 10 hours	25
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Proper start-up, proper engagement and position of broom and proper sweeping technique, 15 hours Removal and replacement of broom wafers, 10 hours Operation of sweeper in cleaning of pavements, 215 hours	250
	Total	320

CRAWLER TRACTOR OPERATOR - code 9306

Maximum
training time: 18 weeks or 720 hours

Code 9306
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 35 hours Starting and manipulating controls for moving equipment and attachments, 30 hours	75
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Movement and stockpiling of material, 150 hours Pushing and rough grading, 125 hours Clearing and grubbing, 125 hours Finish grading, 160 hours Special applications, 30 hours	600
	Total	720

CONCRETE PAVING CURING, FLOAT, TEXTURING MACHINE OPERATOR – code 9315

Maximum
training time: 26 weeks or 1040 hours

Code 9315
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machines in operation, 35 hours Starting and manipulating controls for moving equipment and attachments, 30 hours	75
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Operation of curing system, 120 hours Operation of machine, 790 hours	920
	Total	1040

CONCRETE PAVEMENT FINISHING MACHINE OPERATOR - code 9318

Maximum
training time: 26 weeks or 1040 hours

Code 9318
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machines in operation, 35 hours Starting and manipulating controls for moving equipment and attachments, 30 hours	75
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Screed regulation indoctrination and operation, 120 hours Operation of machine, 790 hours	920
	Total	1040

JOINT SEALER – code 9329

Maximum
training time: 13 weeks or 520 hours

Code 9329
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation, 10 hours	20
2	Care and Maintenance Safety procedures, 10 hours Routine cleaning and servicing, 35 hours	45
3	Actual Operation Safe operating procedures, 10 hours Cleaning and sealing joints in concrete paving, sidewalks, driveways and approach slabs, 445 hours	455
	Total	520

CONCRETE SAW OPERATOR – code 9333

Maximum
training time: 13 weeks or 520 hours

Code 9333
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 35 hours	45
2	Care and Maintenance Safety procedures, 10 hours Routine oiling, greasing, cleaning and servicing saw, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Operation of saw, 420 hours	430
	Total	520

SUBGRADE TRIMMER – code 9339

Maximum
training time: 26 weeks or 1040 hours

Code 9339
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 50 hours Use of paving forms or electronic controls, 40 hours Manipulation of hand and foot levers, 40 hours	140
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Raising and lowering screed; regulating width of screed, 100 hours Operation of machine, 745 hours	855
	Total	1040

SMALL SLIPFORM MACHINE OPERATOR – code 9341

Maximum
training time: 18 weeks or 720 hours

Code 9341
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 35 hours Starting and manipulating controls for moving equipment and attachments, 30 hours	75
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Screed regulation indoctrination and operation, 120 hours Operation of machine, 470 hours	600
	Total	720

CRANE OPERATOR, LATTICE BOOM 80 TONS OR LESS - code 9342

May also require crane operator certification

Maximum
training time: 26 weeks or 1040 hours

Code 9342
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 50 hours Starting and manipulating controls for moving equipment and attachments, 40 hours	100
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 50 hours Loading and unloading materials, 110 hours Hoisting materials, 585 hours Placement of beams, pipe, girders, piles, rock riprap, etc, 150 hours	895
	Total	1040

CRANE OPERATOR, LATTICE BOOM OVER 80 TONS* – code 9343

(May also require crane operator certification)

Maximum
training time: 52 weeks or 2080 hours *Two training credits will be counted for graduation in this classification

Code 9343
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 50 hours Starting and manipulating controls for moving equipment and attachments, 40 hours	100
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 100 hours Loading and unloading materials, 150 hours Hoisting materials, 800 hours Placement of beams, pipe, girders, piles, rock riprap, etc., 885 hours	1935
	Total	2080

CRANE OPERATOR, HYDRAULIC 80 TONS OR LESS – code 9344

May also require crane operator certification.

Maximum
training time: 26 weeks or 1040 hours

Code 9344
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 50 hours Starting and manipulating controls for moving equipment and attachments, 40 hours	100
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 50 hours Loading and unloading materials, 110 hours Hoisting materials, 280 hours Placement of beams, pipe, girders, piles, etc., 455 hours	895
	Total	1040

CRANE OPERATOR, HYDRAULIC OVER 80 TONS – code 9345

(May also require crane operator certification)

Maximum
training time: 26 weeks or 1040 hours

Code 9345
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 50 hours Starting and manipulating controls for moving equipment and attachments, 40 hours	100
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 50 hours Loading and unloading materials, 110 hours Hoisting materials, 280 hours Placement of beams, pipe, girders, piles, etc., 455 hours	895
	Total	1040

LOADER/BACKHOE OPERATOR – code 9346

Maximum
training time: 26 weeks or 1040 hours

Code 9346
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 50 hours Starting and manipulating controls for moving equipment and attachments, 45 hours	105
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Trenching operations (for Pipe laying, etc., 500 hours Excavation (for structures, footings, etc.), 380 hours	890
	Total	1040

EXCAVATOR OPERATOR, 50,000 POUNDS OR LESS – code 9347

Maximum
training time: 18 weeks or 720 hours

Code 9347
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 25 hours Starting and manipulating controls for moving equipment and attachments, 25 hours	60
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Safe operating procedures, 10 hours Excavation for footings and removal of unsuitable materials, 250 hours Loading materials, 100 hours Trenching for pipe, etc., 165 hours Placement of pipe, precast concrete structures, etc., 90 hours	615
	Total	720

EXCAVATOR OPERATOR, OVER 50,000 POUNDS – code 9348

Maximum
training time: 26 weeks or 1040 hours

Code 9348
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 50 hours Starting and manipulating controls for moving equipment and attachments, 40 hours	100
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Excavation for footings and removal of unsuitable materials, 250 hours Loading materials, 190 hours Trenching for pipe, etc., 255 hours Placement of pipe, precast concrete structures, etc., 190 hours	895
	Total	1040

CRUSHER OR SCREEN PLANT OPERATOR – code 9351

Maximum
training time: 26 weeks or 1040 hours

Code 9351
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 35 hours Starting of crusher operating conveyors, 30 hours	75
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Operation of conveyors and crusher operations, 120 hours Operation of crusher, 790 hours	920
	Total	1040

FOUNDATION DRILL OPERATOR, CRAWLER MOUNTED – code 9360

Maximum
training time: 26 weeks or 1040 hours

Code 9360
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 35 hours Starting of crusher operating conveyors, 30 hours	75
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Small hole drilling, 300 hours Large hole drilling, 300 hours Casing operation, 110 hours General operating, 200 hours	920
	Total	1040

FOUNDATION DRILL OPERATOR, TRUCK MOUNTED – code 9363

Maximum
training time: 26 weeks or 1040 hours

Code 9363
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 35 hours Starting of crusher operating conveyors, 30 hours	75
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Small hole drilling, 300 hours Large hole drilling, 300 hours Casing operation, 110 hours General operating, 200 hours	920
	Total	1040

FRONT END LOADER, 3 CY OR LESS – code 9369

Maximum
training time: 13 weeks or 520 hours

Code 9369
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 20 hours Starting and manipulating controls for moving equipment and attachments, 15 hours	45
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Loading materials, 235 hours Excavation, 150 hours Special applications, 35 hours	430
	Total	520

FRONT END LOADER, OVER 3 CY – code 9372

Maximum
training time: 26 weeks or 1040 hours

Code 9372
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 20 hours Starting and manipulating controls for moving equipment and attachments, 15 hours	45
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Loading materials, 400 hours Excavation, 250 hours Charge hoppers with materials on asphalt and concrete plants, 270 hours Special applications, 20 hours	950
	Total	1040

MILLING MACHINE OPERATOR – code 9380

Maximum
training time: 26 weeks or 1040 hours

Code 9380
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 35 hours	45
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Planning roadbed, 700 hours Discharging material into hauling unit, 240 hours	950
	Total	1040

RECLAIMER/PULVERIZER OPERATOR – code 9384

Maximum
training time: 18 weeks or 720 hours

Code 9384
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 35 hours	45
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Machine Safe operating procedures, 10 hours Pulverizing road bed, 520 hours Mixing materials, 100 hours	630
	Total	720

MOTOR GRADER OPERATOR, FINE GRADE* – Code 9390

Maximum
training time: 52 weeks or 2080 hours *Two training credits will be counted for graduation in this classification

Code 9390
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 100 hours Starting and manipulating controls for moving equipment and attachments, 95 hours	205
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Scraping and leveling dirt on roadway, 305 hours Spreading and mixing materials on roadway, 295 hours Shaping and blading subgrades, 275 hours Balancing and rough shaping base course materials, 275 hours Fine grading and dressing of shoulders and slopes, 670 hours	1830
	Total	2080

MOTOR GRADER OPERATOR, ROUGH – code 9393

Maximum
training time: 26 weeks or 1040 hours

Code 9393
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 100 hours Starting and manipulating controls for moving equipment and attachments, 95 hours	205
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Scraping and leveling dirt on roadway, 220 hours Spreading and mixing materials on roadway, 200 hours Shaping and blading subgrades, 180 hours Balancing and rough shaping base course materials, 180 hours	790
	Total	1040

PAVEMENT MARKING MACHINE OPERATOR – code 9396

Maximum
training time: 18 weeks or 720 hours

Code 9396
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 35 hours	45
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Machine Safe operating procedures, 10 hours Laying stripes and markers, 520 hours Loading machine with appropriate materials, 100 hours	630
	Total	720

CONCRETE/GUNITE PUMP OPERATOR – code 9399

Maximum
training time: 18 weeks or 720 hours

Code 9399
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 35 hours Introduction to pumping fresh concrete, gunite and grout, 100 hours	145
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Machine Safe operating procedures, 10 hours Operation of pumping machine, 520 hours	530
	Total	720

ROLLER OPERATOR, ASPHALT - code 9402

Maximum
training time: 26 weeks or 1040 hours

Code 9402
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 35 hours	45
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Roll base course to desired compaction, 440 hours Roll asphalt surfaces to desired compaction and smoothness and assure proper sealing of joints, 500 hours	950
	Total	1040

ROLLER OPERATOR, OTHER – code 9405

Maximum
training time: 13 weeks or 520 hours

Code 9405
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 35 hours	45
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Roll base course to desired compaction, 210 hours Roll embankment to desired compaction, 210 hours	430
	Total	520

SCRAPER OPERATOR – code 9411

Maximum
training time: 13 weeks or 520 hours

Code 9411
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 20 hours Starting and manipulating controls for moving equipment and attachments, 15 hours	45
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Loading and transporting materials, 150 hours Spreading material, 150 hours Rough roadway grading, 70 hours Compaction of embankment, 50 hours	430
	Total	520

OFF ROAD HAULER – code 9413

Maximum
training time: 13 weeks or 520 hours

Code 9413
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 35 hours	45
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Loading and transporting materials, 350 hours Operation of off-road water tanker, 70 hours	430
	Total	520

SELF-PROPELLED HAMMER OPERATOR – code 9417

Maximum
training time: 13 weeks or 520 hours

Code 9417
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 35 hours	45
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Loading and transporting materials, 350 hours Operation of off-road water tanker, 70 hours	430
	Total	520

AGRICULTURAL TRACTOR OPERATOR – code 9428

Maximum
training time: 13 weeks or 520 hours

Code 9428
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 30 hours Starting and manipulating controls for moving equipment and attachments, 25 hours	65
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Pulling compaction implements, 200 hours Pull graders for dressing operations, 200 hours	410
	Total	520

TRENCHING MACHINE OPERATOR, LIGHT – code 9437

Maximum
training time: 13 weeks or 520 hours

Code 9437
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 30 hours Starting and manipulating controls for moving equipment and attachments, 25 hours	65
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Excavation for footing and removal of unsuitable materials, 100 hours Trenching for pipe, etc., 300 hours	410
	Total	520

TRENCHING MACHINE OPERATOR, HEAVY – code 9440

Maximum
training time: 26 weeks or 1040 hours

Code 9440
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 30 hours Starting and manipulating controls for moving equipment and attachments, 25 hours	65
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Excavation for footing and removal of unsuitable materials, 320 hours Trenching for pipe, etc., 600 hours	930
	Total	1040

TUNNELING MACHINE OPERATOR, HEAVY – code 9441

Maximum
training time: 39 weeks or 1560 hours

Code 9441
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Elementary surveying of tunnel alignment and grade, 60 hours General tunneling procedures and operation, 200 hours	270
2	Care and Maintenance Safety procedures, 10 hours Routine lubricating and servicing, 35 hours Electrical connections, motors, and switches, 40 hours Hydraulic components, use and maintenance, 40 hours Spoil haulage equipment and track installation, use and maintenance, 40 hours	165
3	Actual Operation of Equipment Safe operating procedures, 10 hours Soft ground tunneling, 225 hours Ground stabilization, 150 hours Rock tunneling, 240 hours Direct pipe jacking, 240 hours Two pass tunneling, 240 hours Grouting, 20 hours	1125
	Total	1560

TUNNELING MACHINE OPERATOR, LIGHT – code 9442

Maximum
training time: 18 weeks or 720 hours

Code 9442
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Elementary surveying of tunnel alignment and grade, 40 hours General boring procedures and operation, 150 hours	200
2	Care and Maintenance Safety procedures, 10 hours Routine lubricating and servicing, 35 hours Hydraulic components, use and maintenance, 40 hours	85
3	Actual Operation of Equipment Safe operating procedures, 10 hours Soft ground tunneling, 225 hours Rock tunneling, 200 hours	435
	Total	720

PERCUSSION OR ROTARY DRILL OPERATOR – code 9443

Maximum
training time: 13 weeks or 520 hours

Code 9443
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours General drilling procedures and operation, 65 hours	75
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Small hole drilling, 195 hoursLarge hole drilling, 195 hours	400
	Total	520

BORING MACHINE OPERATOR – code 9444

Maximum
training time: 18 weeks or 720 hours

Code 9444
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Elementary surveying of tunnel alignment and grade, 40 hours General boring procedures and operation, 150 hours	200
2	Care and Maintenance Safety procedures, 10 hours Routine lubricating and servicing, 35 hours Hydraulic components, use and maintenance, 40 hours	85
3	Actual Operation of Equipment Safe operating procedures, 10 hours Soft Ground tunneling, 225 hours Rock tunneling, 200 hours	435
	Total	720

DIRECTIONAL DRILLING OPERATOR – code 9445

Maximum
training time: 26 weeks or 1040 hours

Code 9445
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours General drilling procedures and operation, 65 hours Identification of steering head tools, 65 hours Controlling drill speed and direction, 65 hours Pullback of pipe, 65 hours	270
2	Care and Maintenance Safety procedures, 10 hours Drilling fluid characteristics, 65 hours Routine fueling, lubricating and servicing, 35 hours	110
3	Actual Operation of Equipment Safe operating procedures, 10 hours Operation of directional drilling machine, 650 hours	660
	Total	1040

DIRECTIONAL DRILLING LOCATOR – code 9446

Maximum
training time: 18 weeks or 720 hours

Code 9446
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours General locating equipment operation, 55 hours	65
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Machine setup, 200 hours Operation of locating equipment, 400 hours	610
	Total	720

REINFORCING STEEL WORKER – code 9500

Maximum
training time: 18 weeks or 720 hours

Code 9500
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of steel being set and welding of rods, 15 hours	25
2	Care and Maintenance Safety procedures, 10 hours Steel bar placement, 50 hours	60
3	Actual Steel Setting Safety procedures, 10 hours Rod placement and fastening, 300 hours Rod cutting and welding, 175 hours Fabrication of reinforcement assembly, 150 hours	635
	Total	720

STRUCTURAL STEEL WORKER – code 9509

Maximum
training time: 26 weeks or 1040 hours

Code 9509
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of steel worker, 20 hours	30
2	Care and Maintenance Safety procedures, 10 hours Tool review, 10 hours	20
3	Operating with Steel Workers Safety procedures, 10 hours Raise and place fabricated structural steel, 150 hours Emphasis on girders, plates and columns, 100 hours Fasten steel members together by welding or bolting, 400 hours Signal erection crane, rig equipment, 330 hours	990
	Total	1040

SIGN ERECTOR – code 9513

Maximum
training time: 26 weeks or 1040 hours

Code 9513
Step	Process	Hours
1	Orientation and Safe Use of Tools and Equipment Safety procedures, 10 hours Power and hand tools, 20 hours Special fittings and hardware, 10 hours Specifications or design for concrete mixer, 20 hours	60
2	Basic Design Familiarity Blueprint or Construction Plans Reading, 50 hours	50
3	Applied Techniques of Sign Erection Safety procedures, 10 hours Preparation of layout for signs, 30 hours Cuts, ties and sets reinforcing steel for footings, 25 hours Sets forms for, places concrete and sets anchor bolts, 300 hours Erects wood or metal structures, 250 hours Places clamps, brackets or other required hardware on structures, 250 hours Stripping and Salvage of Forms for Re-use, 65 hours	930
	Total	1040

SPREADER BOX OPERATOR – code 9515

Maximum
training time: 13 weeks or 520 hours

Code 9515
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation, 25 hours Starting, stopping and manipulating controls for moving equipment and attachments, 20 hours	55
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safety procedures, 10 hours Selection and loading of materials, 40 hours Spreading of stone or other granular materials, 370 hours	420
	Total	520

WORK ZONE BARRICADE SERVICER – code 9520

Maximum
training time: 18 weeks or 720 hours

Code 9520
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Operation of traffic control truck, 15 hours Traffic control device orientation, 25 hours	50
2	Care and Maintenance Safety procedures, 10 hours Care and storage of equipment and materials, 35 hours	45
3	Traffic Control Operation Safety procedures, 10 hours Fabrication of traffic control devices, 140 hours Erection and Maintenance of traffic control devices, 395 hours Operation of traffic control truck, 80 hours	625
	Total	720

TRUCK DRIVER, SINGLE AXLE – code 9600

May require CDL license for driving on highway.

Maximum
training time: 13 weeks or 520 hours

Code 9600
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation (as a passenger) of vehicle in operation, 50 hours Starting and manipulating vehicle, 40 hours	100
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Loading and unloading materials and operation of vehicle, 365 hours	375
	Total	520

TRUCK DRIVER, SINGLE OR TANDEM AXLE DUMP TRUCK – code 9606

May require CDL license for driving on highway.

Maximum
training time: 18 weeks or 720 hours

Code 9606
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation (as a passenger) of vehicle in operation, 50 hours Starting and manipulating vehicle, 40 hours	100
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Loading and unloading materials and operation of vehicle, 565 hours	575
	Total	720

TRUCK DRIVER, TANDEM AXLE TRACTOR WITH SEMI TRAILER – code 9607

May require CDL license for driving on highway.

Maximum
training time: 26 weeks or 1040 hours

Code 9607
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation (as a passenger) of vehicle in operation, 50 hours Starting and manipulating vehicle, 40 hours	100
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Loading and unloading materials and operation of vehicle, 885 hours	895
	Total	1040

TRUCK DRIVER LOWBOY- FLOAT – code 9609

May require CDL license for on-highway use.

Maximum
training time: 26 weeks or 1040 hours

Code 9609
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation (as a passenger) of vehicle in operation, 50 hours Starting and manipulating vehicle, 40 hours	100
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Loading and unloading materials and operation of vehicle, 500 hours Loading and unloading equipment, 385 hours	895
	Total	1040

TRUCK DRIVER TRANSIT-MIX – code 9612

May require CDL license for on-highway use.

Maximum
training time: 26 weeks or 1040 hours

Code 9612
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation (as a passenger) of vehicle in operation, 50 hours Starting and manipulating vehicle, 40 hours	100
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Mixing materials, 20 hours Loading materials at plant, 115 hours Operation of vehicle, 600 hours Discharging materials, 150 hours	895
	Total	1040

BOOM TRUCK OPERATOR – code 9615

May require CDL license for on-highway use.

Maximum
training time: 26 weeks or 1040 hours

Code 9615
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation (as a passenger) of vehicle in operation, 50 hours Starting and manipulating vehicle, 40 hours	100
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Loading and unloading materials, 410 hours Hoisting materials, 475 hours	895
	Total	1040

STRUCTURAL STEEL WELDER* – code 9705

Requires certification by the American Welding Society.

Maximum
training time: 52 weeks or 2080 hours *Two training credits will be counted for graduation in this classification

Code 9705
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Welding equipment , 20 hours Materials selection , 20 hours Observation of welder, 20 hours Observation of welding of permanent metal deck forms, 40 hours	110
2	Applied Techniques of Welding Safety procedures, 10 hours Acetylene-cutting, brazing and welding, 300 hours Electric-cutting and welding, 300 hours	610
3	Actual Welding Operations Safety procedures, 10 hours Cut, lay out, fit and weld, 700 hours Structural steel welding, 650 hours	1360
	Total	2080

WELDER – code 9706

Maximum
training time: 26 weeks or 1040 hours

Code 9706
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Welding equipment, 20 hours Materials selection, 20 hours Observation of welder, 20 hours	70
2	Applied Techniques of Welding Safety procedures, 10 hours Acetylene-cutting, brazing and welding, 300 hours Electric-cutting and welding, 300 hours	610
3	Actual Welding Operations Safety procedures, 10 hours Cut, lay out, fit and weld sheet metal, cast iron and other metal parts, 350 hours	360
	Total	1040

SLURRY SEAL OR MICRO-SURFACING MACHINE OPERATOR – code 9708

Maximum
training time: 26 weeks or 1040 hours

Code 9708
Step	Process	Hours
1	Orientation and Observation Safety procedures, 10 hours Observation of machine in operation , 35 hours Starting and manipulating controls for moving equipment and attachments, 30 hours	75
2	Care and Maintenance Safety procedures, 10 hours Routine fueling, lubricating and servicing, 35 hours	45
3	Actual Operation of Equipment Safe operating procedures, 10 hours Screed regulation indoctrination and operation, 120 hours Operation of machine and leveling of materials, 790 hours	920
	Total	1040