Design Considerations
To be eligible for a UPS/BBU system, the intersection must
be equipped with LED traffic signal indications.
Installation of UPS/BBU requires determining where to install
the unit in the intersection. The UPS/BBU system will normally be
provided with its own cabinet that will house the inverter, batteries,
and auxiliary equipment. Cabinets can be provided for installation
on the side of the signal cabinet or a separate base mount. In some
cases, the inverter/charger and auxiliary equipment can be installed
in the signal cabinet with the batteries located in a separate cabinet
or ground box. However, this is not recommended, as signal cabinets
do not have room for all the equipment and it can require wiring
modification to the signal cabinet.
In determining whether to install the cabinet to the side
of the signal cabinet or base mounted, the traffic signal cabinet
base should be evaluated to ensure it is structurally adequate and
there is adequate area for access by technicians. Additionally,
there should be no obstruction to sidewalks and pedestrian walkways.
Base mounted cabinets located in low areas that may be subject to
storm water may need a cabinet extension to elevate the cabinet
and prevent possible exposure to high water.