Fabrication Coding

When the sign is fabricated, the sign identification decal is coded as follows:
Row 1:
Indicate the fabricator of the sign as follows.
If sign was fabricated by...
Then punch out...
a commercial fabricator
“C” in the upper left corner
The Texas Department of Criminal Justice
“T” in the upper right corner
TxDOT
Both “C” and “T”
Row 2:
Punch out the letter indicating the month of fabrication.
Row 3:
Punch out the three-digit group indicating the decade of fabrication (for example, punch out "201" for fabrication from 2010 through 2019).
Row 4:
Punch out the digit indicating the year of fabrication (for example, “8” for fabrication in 2018).
Row 5:
Punch out the letter indicating the code for the manufacturer of the sheeting applied to the substrate. Manufacturer codes are located in the .
Row 6:
Punch out the letter indicating the code for the film (colored transparent or non-reflective black) manufacturer. Manufacturer codes are located in the .
Row 7:
Punch out the letter indicating the code for the manufacturer of the sheeting for the legend. Manufacturer codes are located in the .