Section 4: Conduit, Conductors and Ground Boxes
Item 618 - Conduit
Item 618 contains specifications for furnishing
and installing conduit. This includes conduit, fittings, junction
boxes, supports, trenching, and backfill. Conduit is measured by
the linear foot.
The material specifications are in DMS-11030, "Conduit."
Standard sheet ED(1) contains general material and construction
details that apply to all conduit installations and should be included
in all plan sets that use conduit. Standard sheet ED(2) contains details
for conduit supports and should be used when conduit is to be mounted
on structures.
DMS-11030
DMS-11030 specifies the materials for Rigid Metal
Conduit (RMC), Polyvinyl Chloride Conduit (PVC), and High Density
Polyethylene Conduit (HDPE). Conduits that meet the material specification
are listed by their types under Item 618 in the MPL for Roadway
Illumination and Electrical Supplies.
DMS-11030 also contains specifications for conduit
fittings and junction boxes. These materials are not listed on the
MPL, but compliance with the specifications should be verified in
the field.
Item 620 - Electrical Conductors
Item 620 contains specifications for furnishing
and installing conductors. This includes conductors, splices, ground
rods, and breakaway connectors. Conductors are measured by the linear
foot.
The material specifications are in DMS-11040, "Conductors."
Standard sheet ED(3) contains general material and construction details
that apply to all conductor installations and should be included
in all plan sets that use conductors.
DMS-11040
DMS-11040 specifies the materials for type XHHW
conductors. Conductors that meet the material specification are
listed by their types under Item 620 in the MPL for Roadway Illumination
and Electrical Supplies. This section of the MPL also contains approved breakaway
fuse holders that meet the specification.
DMS-11040 also contains specifications for splicing
materials and ground rods. These materials are not listed on the
MPL, but compliance with the specifications should be verified in
the field.
Item 621 - Tray Cable
Item 621 contains specifications for furnishing
and installing tray cable. Tray cable is a multi-conductor cable
assembly and follows the requirements in the NEC for "Power and
Control Cable Type TC." The material specifications are in DMS-11050,
"Tray Cable." Tray cable is measured by the linear foot.
DMS 11050
DMS-11050 specifies the materials for 3-conductor
and 4-conductor tray cable with type XHHW insulation. Cables that
meet the material specification are listed with their sizes under
Item 621 in the MPL for Roadway Illumination and Electrical Supplies.
Item 622 - Duct Cable
Item 622 contains specifications for furnishing
and installing duct cable. Duct cable is a factory assembly of conductors
in a non-metallic raceway, and follows the requirements in the NEC
for "Nonmetallic Underground Conduit with Conductors." Duct cable
is measured by the linear foot.
The material specifications are in DMS-11060, "Duct
Cable." Standard sheet ED(11) contains general material and construction details
that apply to all duct cable installations and should be included
in all plan sets that use duct cable.
DMS 11060
DMS-11060 specifies the materials for HDPE duct
cable with XHHW conductors. Cables that meet the material specification
are listed with their sizes under Item 622 in the MPL for Roadway
Illumination and Electrical Supplies.
Item 624 - Ground Boxes
Item 624 contains specifications for furnishing
and installing ground boxes. Ground boxes may be either factory-made
or cast in place. Item 624 includes ground boxes, covers, and concrete aprons.
The material specifications are in DMS-11070, "Ground
Boxes." Standard sheet ED(4) contains general material and construction details
that apply to all ground box installations and should be included
in all plan sets that use ground boxes.
DMS 11070
DMS-11070 specifies the materials and requirements
for precast polymer concrete ground boxes and covers. Five sizes
of the Types A, B, C, D, and E are specified. Ground boxes that
meet the material specification are listed by their types under
Item 624 in the MPL for Roadway Illumination and Electrical Supplies.