Statement of Work

A statement of work is to be provided in the appropriate space of the Standard Utility Agreement. The statement of work must be sufficiently written to provide a clear and general understanding of the work covered by the agreement. Do not use the phrase “see attached plans” in place of a complete statement of work. The description must be in narrative form and must represent the work appearing on the plans and in the estimate. If more space than provided is required, a separate sheet with the heading "Exhibit A" may be attached to the agreement. The statement "See statement of work described on exhibit A" should be inserted in the space provided on the agreement. Examples follow below. The statement of work must include:
  • highway station;
  • size and type of facility;
  • length or magnitude;
  • estimated contract length;
  • quantity;
  • pertinent material specification; and
  • unique circumstances.
Examples:
  • Adjust an existing 69 kV transmission line to clear Interstate Highway 10 at highway station 468+42 by installing two 80-foot H-frame suspension structures with double cross-arms, and remove three 50-foot single pole structures. Minimum clearance will be 30 feet over the roadway.
  • Remove three 50-foot poles with appurtenances and 1,300 feet of 3-phase #4 ACSR wire. Install two 75-foot H frame structures and 3-75 foot single poles with appurtenances along with 1,700-feet of 3-phase #4 ACSR wire between Highway Station nos. 942+00 and 953+00.
  • Lower approximately 100 feet of 10-inch steel high-pressure gas line at highway Station 182+00 and encase approximately 70-feet with 14-inch steel encasement. Minimum depth of cover under the pavement structure will be 60-inches with 48-inches of cover under ditches. Vent pipes will be placed at each right of way line.