Profile Sheet Requirements
A Profile Sheet shall accurately depict the following items:
- View direction (facing)
- The entire dimension of the Pole or Service Structure (new/proposed/existing)
- Existing structure view, if the proposed Broadband Installation will replace or be attached to an existing structure
- Proposed structure view, or two different adjoining views (e.g., north and west) if it is a new structure
- All attached Network Node equipment (e.g., antenna, Network Node, ancillary equipment)
- Node Transport Facility location and depth (if part of the application)
- Foundation view or reference to Typical sheet for proposed foundations
- Buried pole depth for new or replaced Pole or Service Structure without foundation
- Proposed hand boxes, vaults, and hand holes
- Proposed underground conduits (within 10' of the network support structure)
- Grounding detail or reference to Typical page
- Proposed ground-based enclosure
- Node Position Key to Department Right-of-Way and road alignment for each Profile View (see Figure B-5). This detail does not have to be to scale but must show alignment on a quadrant and reference the street and the ROW perspectives.
- Roadway features, including driveways, ramps, and sidewalks, to verify Pole location will not interfere with proposed Improvements
- Minimum depth of cover for proposed power and communications conduit
- Offset from Department Right-of-Way line to power
All the following items shall be dimensioned:
- Antenna height above Pole or Service Structure
- Pole or Service Structure dimension at the base
- Distance from Department Right-of-Way line
- Antenna and cabinet offset from Pole or Service Structure
- Overall height of the Pole or Service Structure above grade
- The vertical clearance of any adjacent overhanging roadway
- Ground-based enclosures and height above grade
- Pole-mounted or Service Structure-mounted enclosures and height above grade

Figure B-5. Node Position Key