Pre-Positioning
For the operation to begin efficiently, the required barricades
and signs should be in their proper locations no later than the
day before the sealing begins. For strip/spot seal coat work, traffic control
devices are normally placed on the day the work is performed. Generally,
there should be one person who has full responsibility for traffic
control. Traffic control includes erecting signs and barricades,
placing traffic cones, flagging, and moving appropriate traffic
control devices down the roadway as close as possible behind the
seal coat equipment.
Project signing should be completed before beginning any seal
coat work. Signs should be covered until they become effective and
removed when no longer needed.