Sometimes small quantities of asphalt are inadvertently spilled where distributors were loaded and around the heater units. Any spilled asphalt should be removed and disposed of properly.

All excess aggregate at the stockpile area must be removed. Any trash must also be removed, and the area should be left in a condition acceptable to TxDOT.

All warning signs and barricades used on the project must be removed from the area after the project has been accepted. Ensure all construction sign supports are completely removed to avoid future tire damage.

Carefully inspect the areas around stockpiles and any other area where equipment has been used. Fences, mailboxes, and other private property should be inspected for damage and any damages must be repaired.