Maintenance and Repair
Culverts and storm drains may become clogged by:
- silting
- drift
- collapse or crushing
- grate and sewer clogging
- erosion at culvert ends.
These appurtenances should be cleared as soon as practical after a significant loss of hydraulic capacity has been observed or reported. Significant erosion should be repaired as soon as practical. Deficient appurtenances should be repaired or replaced as soon as practical. Please refer to the Wetlands/Streambed Permits for requirements in wetland areas. (
Maintenance Management Manual
, Chapter 5,
)Drainage pump stations should be maintained in a serviceable condition. Periodic inspection of pumps and related equipment should be performed to insure proper operation.