Off-Year Bridge Maintenance Inspection
Off-year inspections are required to be performed by TxDOT
staff. These inspections are in addition to and are not replaced
by the contracted federal routine bridge safety inspection. The
term “off-year” is used because these inspections are scheduled
to generally occur in the alternating years that routine safety
inspections do not occur. The off-year inspection reports should
be reviewed by the engineer responsible for maintenance. Prompt
scheduling of necessary preventive maintenance and repairs should
follow this review.
Attention should also be given to routine or preventive maintenance
work such as:
- cleaning the approach roadway and bridge deck surfaces of debris and contaminants
- restoration, delineation and signing
- cleaning and servicing joints and bearings
- removal of drift from around substructures.
Prompt maintenance and repair should follow these inspections.
Notify the district bridge inspection coordinator of the type
of work performed and when it was done.