Classification

Pedestrian

Description

Six pipe rails, with 3.5-inch HSS steel pipe for the top rail and 2.375-inch HSS steel pipe for the lower rails. Its 5-inch-wide steel-plate posts are spaced a maximum of 10 ft. apart.

Approved test criteria and level

The PR11 railing is designed for pedestrian loads only. It has not been crash-tested, and it is not intended for exposure to traffic. If this railing is used on a bridge or culvert, it must be protected from vehicular impact by an approved bridge rail type.

Nominal height

42 inches

Minimum height after maintenance overlays

42 inches