Re-decking projects when deck condition meets the BMIP criteria.

Bridge raisings if the bridge has damage due to over-height impacts (superstructure equals 5 or 6 as a result of impact damage). Additional bridges could be included on a case-by-case basis to ensure that raising one does not move the impact problem to another bridge.

Relief joints in concrete pavement and/or approach slab work if action helps to improve deck, substructure, or superstructure element ratings (limit of 40 feet from end of bridge).

Approach guard fence, mow strip, safety end treatment, and transition when associated with other approved work (

up to

150 ft.

.per bridge corner

).

Steel protective coatings.

All painting projects

under this program

must use thirdparty paint inspection services

provided and funded by the Materials and Tests Division.

Post-tension repairs. Overview during implementation must be coordinated with Bridge Division to ensure inspection forces are experienced and trained in repair work.

Installation of corrosion mitigation measures

cathodic protection system.

Retrofits of two-column bents and crash-wall installation.

Steel piling encasements