Materials test procedures
Materials
| Test Procedure | Title | Archive | Form |
|---|---|---|---|
| Tex-400-A | Sampling Aggregate and Stone Riprap | X | X |
| Tex-401-A | Sieve Analysis of Fine and Coarse Aggregate | ||
| Tex-402-A | Fineness Modulus of Fine Aggregate | ||
| Tex-403-A | Saturated Surface-Dry Specific Gravity and Absorption of Aggregates | X | X |
| Tex-404-A | Determining Unit Mass (Weight) of Aggregates | X | |
| Tex-405-A | Determining the Percent of Solids and Voids in Concrete Aggregate | ||
| Tex-406-A | Material Finer than 75 um (No. 200) Sieve in Mineral Aggregates (Decantation Test For Concrete Aggregates) | ||
| Tex-407-A | Sampling Freshly Mixed Concrete | X | |
| Tex-408-A | Organic Impurities in Fine Aggregate for Concrete | X | |
| Tex-409-A | Free Moisture and Water Absorption in Aggregate for Concrete | ||
| Tex-410-A | Abrasion of Coarse Aggregate Using the Los Angeles Machine | ||
| Tex-411-A | Soundness of Aggregate Using Sodium Sulfate or Magnesium Sulfate | X | |
| Tex-412-A | Lightweight Pieces in Aggregate | ||
| Tex-413-A | Determining Deleterious Material in Coarse and Fine Aggregate | X | |
| Tex-414-A | Air Content of Freshly Mixed Concrete by the Volumetric Method | X | |
| Tex-415-A | Slump of Hydraulic Cement Concrete | X | |
| Tex-416-A | Air Content of Freshly Mixed Concrete by the Pressure Method | X | |
| Tex-417-A | Unit Weight, Yield, and Air Content (Gravimetric) of Concrete | X | |
| Tex-418-A | Compressive Strength of Cylindrical Concrete Specimens | X | |
| Tex-419-A | Compressive Strength of Concrete using Portions of Beams Broken in Flexure | X | |
| Tex-421-A | Splitting Tensile Strength of Cylindrical Concrete Specimens | X | |
| Tex-422-A | Measuring Temperature of Freshly Mixed Portland Cement Concrete | X | |
| Tex-423-A | Determining Concrete Thickness, Depth of Reinforcement, and Saw Cut Depth by Direct Measurement | X | |
| Tex-424-A | Obtaining and Testing Drilled Cores of Concrete | X | |
| Tex-425-A | Determining Moisture Content in Fine Aggregate by the "Speedy" Moisture Method | ||
| Tex-426-A | Estimating Concrete Strength by the Maturity Method | X | X |
| Tex-427-A | Correlating Concrete Strength Tests | X | |
| Tex-428-A | Determining the Coefficient of Thermal Expansion of Concrete | X | |
| Tex-429-A | Determining the Percent Solids in Lightweight Coarse Aggregate | ||
| Tex-430-A | Slump Loss of Hydraulic Cement Concrete | X | |
| Tex-431-A | Pressure Slaking Test of Synthetic Coarse Aggregate | ||
| Tex-432-A | Coarse Aggregate Freeze-Thaw Test | ||
| Tex-433-A | Absorption and Dry Bulk Specific Gravity of Lightweight Coarse Aggregate | ||
| Tex-434-A | Breaking Strength of Traffic Buttons | ||
| Tex-436-A | Measuring Texture Depth by the Sand Patch Method | X | |
| Tex-437-A | Test for Flow of Grout Mixtures (Flow Cone Method) | X | |
| Tex-438-A | Accelerated Polish Test for Coarse Aggregate | ||
| Tex-439-A | Absorption Test for Concrete Pipe | X | |
| Tex-440-A | Initial Time of Set of Fresh Concrete | X | |
| Tex-441-A | Wick Induced Bleed Test of Freshly Mixed Grouts | X | |
| Tex-442-A | Determining Compressive Strength of Grouts | X | |
| Tex-446-A | Rebound Number of Hardened Concrete | X | |
| Tex-447-A | Making and Curing Concrete Test Specimens | X | |
| Tex-448-A | Flexural Strength of Concrete Using Simple Beam Third-Point Loading | X | |
| Tex-449-A | Determining Crazing Resistance of Ceramic Raised Pavement Markers | X | |
| Tex-450-A | Capping Cylindrical Concrete Specimens | X | |
| Tex-451-A | Density of In-Place Unhardened and Hardened Concrete by the Nuclear Methods | X | |
| Tex-452-A | Rotational Capacity Testing of Fasteners Using a Tension Measuring Device | ||
| Tex-460-A | Determining Crushed Face Particle Count | ||
| Tex-461-A | Micro-Deval Abrasion of Aggregate | X | |
| Tex-470-A | Optimized Aggregate Gradation for Hydraulic Cement Concrete Mix Designs | X | |
| Tex-471-A | Lithium Dosage Determination Using Accelerated Mortar Bar Testing | X | |
| Tex-472-A | Uniformity of Concrete | X | |
| Tex-475-A | Determining the Tensile Performance of Fiber-Reinforced Concrete Using Double Punch Test | ||
| Tex-498-A | Minimum Standards for Acceptance of a Laboratory for Concrete and Aggregate Testing | X | |
| Tex-499-A | Aggregate Quality Monitoring Program | X |
Contact the Rigid Pavements and Concrete Materials Section at (512) 506-5858 for more information pertaining to test procedures for portland cement concrete, reinforcing steel, and seven wire strand.
Contact the Soils and Aggregates Section at (512) 506-5907 for more information pertaining to testprocedures for aggregates.