| County |
Date |
Restriction |
|
Borden County, FM1205 |
08-20-07 |
No loads over 80,000#GVW or over 34,000#/axle group on bridge
between the Borden-Howard County Line and FM1785. |
|
Callahan County, IH20NFR |
01-24-07 |
No over length permits turning from IH20 NFR to US283 NB. This
affects both directions of travel on IH20 NFR |
|
Callahan County, US283 |
01-24-07 |
No over length permits from turning from US283 SB to IH20 NFR. |
|
Callahan County, SH36 |
07-21-08 |
No width from SH206 to FM2707 in Cross Plains. |
|
Fisher County, FM2832 |
08-20-07 |
No loads over 80,000#GVW or over 34,000#/axle group on the bridge
between FM611 and US180. |
|
Fisher County, FM1085 |
08-20-07 |
No loads over 50,000#GVW on the bridge between FM57 and US180. |
|
Fisher County, FM611 |
08-20-07 |
No loads over 80,000#GVW or over 34,000#/axle group on the two
bridges between FM2832 and FM3205. |
|
Fisher County, FM419 |
08-20-07 |
No loads over 28,000#/axle group on bridge between FM57 and FM611. |
|
Fisher County, FM419 |
08-20-07 |
No loads over 17,500#/axle group on bridge between FM57 and the
Fisher-Nolan County Line. |
|
Haskell County, US380/Haskell |
10-26-07 |
65' max length turning to/from BU277/Haskell. This does not affect
travel straight through on US380 or BU277. This is a permanent
restriction. |
|
Haskell County, BU277/Haskell |
10-24-07 |
65’
max length turning to/from US380. This does not affect travel
straight through on US380 or BU277. Do not permit on BU277/Haskell
unless stopping or starting there. These are permanent. |
|
Howard County, FM1785 |
08-20-07 |
No loads over 28,000#/axle group on bridge between FM1584 and US87. |
|
Jones County, US83/US277 |
01-11-07 |
110' max length from US180 to the US83/US277 "Y"
north of Anson. This is a permanent restriction. |
|
Jones County, SH92 |
11-01-07 |
11’ max width from the FM1835 to ½ mile west of US83. |
|
Jones County, FM707 |
08-20-07 |
No loads over 28,000#/axle group on the bridge between FM1812 and
FM605. |
|
Mitchell County, IH20 |
08-20-07 |
No access traveling from the IH20.NFR to E.BI20 in Colorado City. |
|
Mitchell County, SH350 |
08/20/07 |
No loads over 80,000#GVW or over 34,000#/axle group on bridge
between FM1298 and the Mitchell-Scurry County Line. |
|
Mitchell County, FM1308 |
08/20/07 |
No loads over 28,000#/axle group on bridge between FM670 and end of
state maintenance. |
|
Mitchell County, FM670 |
08/20/07 |
No loads over 28,000#/axle group on bridge between IH20 and SH163 |
|
Nolan County, IH20 |
11-07-06 |
No width and/or length crossing over IH20 @ Eskota Rd CR227), located east of FM1856. |
|
Nolan County, BI20/Sweetwater |
11-30-07 |
10’ max width from ½ mile west of FM419 to ¼ west of FM419 on the
bridge over the railroad tracks. |
|
Nolan County, US84 EB |
12-17-07 |
No weight on the bridge at W.IH20 just east of Roscoe. This only
affects US84 eastbound to IH20 eastbound. |
|
Nolan County, FM1856 |
06-27-08 |
12’ max width and/or 85’ max length from FM2035 to SH70. This is a
permanent restriction. |
|
Nolan County, FM419 |
08-20-07 |
No loads over 19,000# single axle or 19,000# tandem axle on
bridge between FM1544 and the Nolan-Fisher County Line. |
|
Scurry County, US180 and SH350 in Snyder |
12-09-05 |
All permit loads must use this route when traveling on SH350 through Snyder: SH350 n,
FM2763 e, SH208 n, US180 e. Reverse for opposite direction. This is
the Snyder truck route. Travel on US84 and US180 straight through is
not affected. |
|
Scurry County, US180, SH208, & BU84/Snyder |
01-23-08 |
14’6” max height, 65’ max length, no width, and/or no weight from
FM1605 to FM1607.
This includes the sections of BU84 in Snyder and SH208 that are double signed with
US180 from FM1605 to SH350. |
|
Scurry County, US84 |
07-03-07 |
9' max width from US180 to SE.BU84/Snyder. |
|
Scurry County, FM1611 |
07-03-08 |
No weight on bridge over US84 in Snyder. |
|
Shackelford County, US180 E |
06-14-02 |
80’ max length traveling US180e, SH351s, to SH351n, turnaround. No Lowboys. This
is a permanent restriction. |
|
Shackleford County, US180/US283/SH6 |
07-24-08 |
Albany inset: No width, 85’ max length, and/or no weight from
E.SH6 to W.US283. (This is all within the Albany city limits).
|
|
Shackleford County, CR187 |
07-24-08 |
Do not use CR187 to drop off to/from US180 and to/from FM1084. CR187 is under construction. |
|
Shackleford County, FM2408 |
08-20-07 |
No loads over 51,000# single vehicle, 80,000# combo vehicle
20,000# single axle or over 34,000# tandem axle on bridge between
FM576 and the Shackleford-Stephens County Line. |
|
Shackeford County, FM576 |
08-20-07 |
No loads over 28,000#/axle group on bridge between FM880 and FM2312. |
|
Stonewall County, US83 |
10-02-07 |
12’ max width and/or 16’ max height from N.FM1263 to W.US380. |
|
Stonewall County, FM1835 |
08-20-07 |
No loads over 28,000#/axle group on bridge between US380 and FM1263. |
|
Taylor County, IH20NFR |
01-11-07 |
No width, length, and/or weight from US83 to 1 mile east of FM3438. This
is in the Abilene inset. |
|
Taylor County, IH20 |
03-07-07 |
12’ max width and/or 110’ max length from FM3438 to BU83/Abilene. |
|
Taylor County, IH20 WB to W.BI20 EB |
06-08-05 |
When traveling IH20 WB to W.BI20 EB, in Abilene, there is not a marked exit for W.BI20. You
must exit from IH20 WB to the IH20 NFR just west of FM3438 and travel west to W.BI20. |
|
Taylor County, BI20/US84 in Abilene |
04-28-08 |
10’ max width from W.IH20/W.US84 to US277/US83 E.US84. |
|
Taylor County, US277 |
08-20-07 |
No loads over 33,000# single vehicle, 52,000# combo vehicle, 16,000#
single axle or over 22,000# tandem axle on bridge between FM89 and
FM1086. |
|
Taylor County, US277 |
08-20-07 |
No loads over 80,000#GVW or over 34,000#/axle group on bridge
between FM1086 SH153. |
|
Taylor County, US277 |
08-20-07 |
No loads over 26,000# single vehicle, 43,000# combo vehicle,
14,000# single axle or over 18,000# tandem axle on bridge between
SH153 and the Taylor-Runnells County Line. |
|
Taylor County, US83WFR |
01-11-07 |
No width, length, or weight from FM2404 to IH20. |
|
Taylor County, US84 |
06-25-08 |
No width from FM613 to FM614. |
|
Taylor County, FM126 |
08-20-07 |
No loads over 28,000#/axle group on bridge between FM1085 and FM89. |
|
Taylor County, FM126 |
08-20-07 |
No loads over 20,000# single axle or over 33,000# tandem axle on
bridge between FM1085 and FM89. |
|
Taylor County, FM3438 |
05-05-08 |
No permits from US84/W.BI20/Abilene to ½ mile north. |
|
Taylor County, FM89 |
05-07-98 |
14' max width, 14' max height, and/or 85' max length from FM1235 to FM613 in Buffalo Gap. This is a permanent restriction. |
