| County | Date | Restriction |
| Erath County, US67 to/from SH220 | 10-22-07 | FYI: Loads traveling US67 to/from SH220 have approval to use CR199/CR197. |
| Erath County, BU377 | 05-07-99 | No lowboy type trailers from SH108 to S.US377/US67, in Stephenville. |
| Erath County, SH108 | 08-25-95 | No width from FM8 to US377/US67. |
| Hood County, US377 and FM51 Intersection | 05-14-92 | There are no entrance
or exit ramps US377 to/from FM51.
When traveling FM51 to US377 you must take FM51 n to SH144 s to US377. When traveling US377 to FM51 you must take SH144 n to FM51 s. |
| Hood County, US377 | 06-27-97 | The 14' overhead structure at Tolar
does not have a detour.
Also, do not use Electric Road as a detour; this is not a completely paved road. This is a permanent restriction |
| Hood County, BU377 | 06-02-06 | No permits from N.US377 to S.US377 in Granbury.
This is a permanent Restriction. |
| Hood County, BU377 | 11-13-92 | All loads starting/stopping between N.US377 and S.US377 in Granbury must contact the Granbury Police at (817) 573-2648. |
| Hood County, SH144 | 12-18-07 | No permits from BU377 in Granbury to FM51.
This is a permanent restriction. |
| Hood County, FM4 | 12-18-07 | No permits from LP567 in Granbury to W.BU377.
This is a permanent restriction. |
| Hood County, FM51 | 12-18-07 | No permits from LP567
in Granbury to N.FM4.
This is a permanent restriction. |
| Hood County, FM2580 | 09-28-11 | 10' max width from FM4 to the Parker/Hood County line. |
| Jack County, US281/US380/SH114/SH199 | 12-28-11 | Over 10' wide:
20' max width from 1/4 mile south of PR61 to SH59. |
| Jack County, SH59 | 02-08-08 | 65’ max length from FM1810 to US380/US281/ SH114 in Jacksboro. |
| Jack and Palo Pinto Counties, FM4 | 12-07-07 | No width from FM2210 to IH20.
This does not include SH254 between E.FM4 and W.FM4 in Graford or US180 between E.FM4 and W.FM4 in Palo Pinto. |
| Jack and Wise Counties, FM1810 | 12-07-07 | Over 12' width: A front escort is required from SH59 to FM2127. |
| Johnson County, JCT IH35W & FM3136 | 07-29-10 | There is no access at for
the following turns:
IH35W NB to FM3136 WB FM3136 EB to IH35W NB |
| Johnson County, IH35W SB to FM3136 WB | 07-29-10 | No permits for traveling IH35W SB to FM3136 WB. |
| Johnson County, BU67 in Cleburne | 10-05-11 | Over 17’ high: The mover
must contact Oncor 48hrs in advance at (888) 313-4747 before
traveling on BU67 from SW.US67 to NE.US67 in Cleburne.
This is due to overhead lights and lines. |
| Johnson County, N.BU67 | 03-10-03 | There is no access from N.BU67 to US67 SB in Cleburne. |
| Johnson County, SH171 | 04-01-08 | Do not use Hines Road or Edgewood Road to detour the 16' high railroad structure on SH171 just south of the S.SH171/SH174 split in Cleburne. |
| Johnson County, SH171 in Cleburne Portion of SH174 |
10-05-11 | Over 17’ high: The mover
must contact Oncor 48hrs in advance at (888) 313-4747 before
traveling on SH171 from S.SH174 to 3 ¼ miles northwest of US67.
This restriction also affects SH174 where it is double signed with SH171. This is due to overhead lights and lines. |
| Johnson County, SH174 in Cleburne Portion of SH171 |
10-05-11 | Over 17’ high: The mover
must contact Oncor 48hrs in advance at (888) 313-4747 before
traveling on SH174 from 1 ½ miles south of S.SH171 to1 ¼ miles
north of FM3048.
This restriction also affects SH174 where it is double signed with SH171. This is due to overhead lights and lines. |
| Johnson County, FM4 | 04-05-06 | No lowboy type trailers over the railroad crossing between SH174/171 and FM2135. |
| Johnson County, FM916 | 10-31-01 | No width and/or no length traveling to SH81 NB or SB. |
| Johnson County, FM917 | 05-22-06 | 10' max width and/or 65' max
length from SH174 to 14th Street in Joshua.
This includes turns to or from SH174. Detour for FM917 EB: FM917 e to 14th street, SH174n from 14th street, FM917 e. Reverse for FM917 WB. Detour SH174 NB or SB to FM917 WB: SH174 to 14th street, FM917 w from 14th street. |
| Johnson County, SP102 | 09-15-11 | No width and/or no length from the US67 NFR to end of state maintenance. This is a permanent restriction. |
| Johnson County, Hillcrest St in Keene | 09-15-11 | No permits on Hillcrest St in Keene.
This is a permanent restriction. |
| Palo Pinto County, US281 | 07-29-98 | Over 10' wide
must have an flagman to warn oncoming traffic while load
crosses the Brazos River Truss Bridge located approximately
2 miles north of IH20.
This is a permanent restriction. |
| Palo Pinto County, US281 | 03-20-08 | Do not use Cemetery Road
to detour the 13'6" high overhead structure
at the railroad overpass located 5.5 miles north of IH20.
The Palo Pinto County will issue tickets to any truck that uses the Cemetery Road. This is a permanent restriction. |
| Palo Pinto County, SH16 | 11-21-88 | No weight on lowboy type trailers
from SH108 in Strawn south to the Palo Pinto/Eastland County line.
This is a permanent restriction. |
| Palo Pinto County, SH254 | 07-27-11 | 11' max width from FM52 to US281. |
| Palo Pinto and Jack Counties, FM4 | 12-07-07 | No width from FM2210 to IH20.
This does not include SH254 between E.FM4 and W.FM4 in Graford or US180 between E.FM4 and W.FM4 in Palo Pinto. |
| Palo Pinto County, FM4 | 05-09-94 | No lowboy type trailers from FM129 to FM2201. |
| Palo Pinto County, FM207 | 05-29-08 | All loads, including manufactured homes and portable buildings, over 14’ wide must have a front escort from SH16 to the Palo Pinto/Stephens County Line. |
| Palo Pinto County, FM1821 | 06-29-04 | 100,000 lbs. max GVW from US281 to FM1195. |
| Parker County, City of Weatherford | 08-25-08 | 120’ max length
and/or 254,000 lbs max GVW in Weatherford city limits.
For vehicles that exceed 120’ max length and/or 254,000 lbs max GVW, 1) Driver must call Weatherford Police at 817-598-4300 or 817-598-4301, 48 hours and also 2 hours prior to arrival. (This is to make sure that they have adequate officers to escort the load through the city.) 2) They cannot travel in the city limits between 7:00am - 9:00am and 4:00pm - 6:00pm. This restriction does not apply to vehicles that are traveling straight through on IH20. FYI: As of the date this restriction was posted, the Weatherford city limits begin and end as follows: US180: From IH20 to ¾ mile west of SP312. SH171/FM51: From ½ mile south of IH20 to ½ mile north of FM920. FM920: From 1 mile west of FM2421 to FM51. FM1884: From ¼ mile south of IH20 to FM51. SP312: From ¾ mile southwest of US180 to US180. These city limits are not fixed. Weatherford city limits change due to annexations. |
| Parker County, Weatherford City Streets | 07-18-11 | No permits on
Weatherford City streets with the following exceptions:
Spring St, Bowie Dr, Lake Shores Dr, and Dennis Rd. This is a permanent restriction. |
| Parker County, IH20 NFR at the Brazos River Truss Bridge | 04-18-07 | No permits over
the Brazos River Truss Bridge.
This is a permanent restriction. |
| Parker County, IH20 | 06-14-11 | 14’ max width from SP312 in Weatherford to FM113. |
| Parker County, JCT IH20 & SP312 in Weatherford | 07-21-09 | There is no access
traveling IH20 WB to SP312 NE.
There is no access traveling SP312 SW to IH20 EB. |
| Parker County, IH20 | 10-03-05 | There are no entrance or exit ramps for Center Point Road located west of US180 in Weatherford. |
| Parker County, US180 | 11-16-11 | 12' max width from
FM2552 to N.Denton Rd in Weatherford.
N.Denton Rd is located approximately ½ mile east of FM2552. |
| Parker County, SH171 and FM51 | 11-20-95 | 14' max width,
15'6" max height, and/or 90' max length from US180 to
IH20.
NB Detour: "...SH171n, IH20e, FM2552n JCT US180...Weatherford...Pick Up @ Spring Street & FM51n..." SB Detour: "...FM51s JCT Spring Street... Weatherford...TO JCT US180 & FM2552s, IH20w, SH171s..." This is a permanent restriction. |
| Parker County, FM51 | 08-23-07 | No permits from
US180 to Spring Street in Weatherford.
Spring Street is approximately 1/4 mile north of US180. |
| Parker County, FM113 | 05-09-94 | No lowboy type trailers through Millsap. |
| Parker County, FM1187 | 01-25-10 | No overweight lowboy type
trailers from Old Annetta Rd to Oak St in Aledo.
Old Annetta Rd is located approximately ½ mile north of FM5. Oak St is located approximately ¾ mile north of FM5. This is due to a railroad crossing in Aledo. |
| Parker County, FM2552 | 10-09-08 | No weight from IH20 to US180. |
| Parker County, FM2552 | 09-01-11 | No permits from 1 mile south of US180 to US180. |
| Parker County, LP344 in Azle | 07-16-07 | There is no direct access from LP344 NB to SH199 NB or SB. |
| Somervell County, US67 SB at Brazos River Truss Bridge | 06-17-08 | Over 13' wide and/or over 13’ high traveling on US67 SB must use center of bridge while crossing the Brazos River Truss Bridge in Nemo. |
| Somervell County, US67 at SW.SH144 | 05-19-08 | No length turning to
and/or from SW.SH144.
Travel straight through on US67 is not restricted. |
| Somervell County, US67 at FM205 | 05-19-08 | No length turning to
and/or from FM205.
Travel straight through on US67 is not restricted. |
| Somervell County, US67 at FM56 | 05-19-08 | No length turning to
and/or from FM56.
Travel straight through on US67 is not restricted. |
| Somervell County, SH144 | 11-15-07 | No height from W.US67 to N.FM56. |
| Somervell County, SH144 | 05-19-08 | No length from SW.US67 to S.FM56 |
| Somervell County, FM56 | 05-19-08 | No length from US67 to S.SH144. |
| Somervell County, FM205 | 12-18-07 | No weight from S.FM51 to US67 due to a steep grade.
This is a permanent restriction. |
| Tarrant County, County Curfew | 10-17-97 | No width, no height, and/or no length in Tarrant County
between the hours of 7-9am & 4-6pm Monday through Friday.
This does not apply to weight only loads. This is a permanent restriction. Mobile cranes are exempt from the Tarrant county curfew. |
| Tarrant County, City of Fort Worth | 09-21-10 | All loads must be detoured around
downtown Fort Worth by using IH20 and IH820.
The following routes inside IH820 may be used without approval from Fort Worth District: "JCT SH183 & IH35Wn..." or "...IH35Ws JCT SH183." "...Ft WORTH: E.IH820s, N.US287nw, Crossover @ Village Creek Rd, US287se, IH820s..." "JCT SEMINARY Dr & IH35Ws..." or "...IH35Wn JCT SEMINARY Dr." "...Ft WORTH: W.IH820n, EXIT @ SP580, IH820 EFRn, IH30 SFRe, CROSSOVER @ DALE Ln, IH30 NFRw, IH820n&e..." "JCT SH183 & BU287n..." or "...BU287s JCT SH183." "...US377n, SH183ne, SH199nw..." “…US377n, SH183n&e, BU287n…” “…BU287s, SH183w&s, US377s…” All other routes traveling inside IH820 must be approved by the Fort Worth District office. This is a permanent restriction. |
| Tarrant County, IH20/IH820 NFR | 09-26-11 | No width on the NFR from SH183 to SP465. |
| Tarrant County, JCT IH35W & SH174 | 09-05-08 | There is no access for the following turns:
|
| Tarrant County, IH35W NB to SB at N.US287 | 12-12-08 | There is no access when traveling IH35W NB to IH35W SB at N.US287 north of N.IH820. |
| Tarrant County, IH635 WB to SH121 SB | 04-27-10 | 14’6” max height traveling IH635 WB to SH121 SB. |
| Tarrant County, IH820 | 04-30-93 | No permits E.IH820 NB to SH121 SB.
Detour: IH820 n, SH183/10 w, Handley Ederville Rd. s, SH121 s. |
| Tarrant County, Meadowbrook Dr over E.IH820 in Fort Worth | 03-30-11 | 12' max width and/or 65' max
length on Meadowbrook Dr crossing over E.IH820 in Fort Worth.
Meadowbrook Dr is located approximately 1 mile south of IH30. This is a permanent restriction. FYI: To detour, loads should use John T. White Rd to crossover instead. John T White Rd is located approximately ½ mile north of IH30. |
| Tarrant County, N.IH820 | 06-02-11 | 10’ max width from IH35W to N.SH121. |
| Tarrant County, N.IH820 and SH199 | 09-24-08 | 100’ max length turning N.IH820
to/from SH199; these are cloverleaf turns.
It affects these turns: WB to SB, EB to NB, NB to WB, and SB to EB. This is a permanent restriction. |
| Tarrant County, W.IH820 WFR SB to IH20 WB | 01-25-11 | There is no access traveling
W.IH820 WFR SB to IH20 WB.
Traveling SB to WB is only possible by using the ML to ML direct connector. |
| Tarrant County, E.US287 NB to E.IH20 NFR WB | 04-07-09 | There is no access
when traveling E.US287 NB to E.IH20 NFR WB.
This is at JCT E.US287 & IH20 east of E.IH820. |
| Tarrant County, US287/US81 SB to FM718 WB | 03-23-10 | When traveling US287 SB to FM718
WB, you must mention the BU287 SB access ramp in Avondale.
There are no signs on US287 SB that say the BU287 exit ramp is also for FM718. Route:“…US287s, Avondale: BU287 SB Access Ramp, FM718w…” or “…US287s, Avondale: Exit @ BU287, FM718w…” |
| Tarrant County, BU287 in Fort Worth | 01-04-11 | 10’ max width and/or 65’ max
length from the 5th St/Houston St intersection to Belknap St in
Fort Worth.
The 5th St/Houston St intersection is located approximately ¾ mile west of N.IH35W where BU287 changes from an EB/WB highway into a NB/SB highway. Belknap St is located approximately 1mile northwest of IH35W. |
| Tarrant County, SH26 | 11-09-11 | 10' max width and/or 15' max height from 3 miles southwest of W.SH114 to W.SH114. |
| Tarrant County, SH114 Portion of SH26 Portion of SH121 |
06-06-11 | 14’6” max height from
FM1709 to the Dallas/Tarrant County line.
This restriction also affects SH26 where it is double signed with SH114. This restriction also affects SH121 where it is double signed with SH114. |
| Tarrant County, SH121 Portion of SH26 Portion of SH114 |
06-06-11 | 14’6” max height from
SH360 to Bass Pro Dr in Grapevine.
Bass Pro Rd is located between IH635 and FM2499 This restriction also affects SH26 where it is double signed with SH121. This restriction also affects SH114 where it is double signed with SH121. |
| Tarrant County, SH121 NB | 10-27-05 | Over 45’ long traveling SH121 NB to E.IH820 SB must exit at Handley-Ederville Road south to Trinity Blvd. east to E.IH820 south. |
| Tarrant County, SH121 WFR | 04-27-10 | 14’6” max height from SH26 to IH635. |
| Tarrant County, SH121 | 03-14-06 | 80,000 lbs. max GVW over SH121 on the Bass Pro Drive bridge in Grapevine. |
| Tarrant County, JCT SH180 & SH360 | 03-18-10 | 10’ max width, 13’6” max height, and/or no length for all turns to or from either highway. |
| Tarrant County, SH183 NFR WB to IH20/IH820 NFR WB | 08-05-11 | 65' max length travelling SH183 NFR WB to IH20/IH820 NFR WB. |
| Tarrant County, SH183 NFR | 08-10-11 | No width and/or 65' max
length from Insurance Ln to SP465 in Fort Worth.
Insurance Ln is located approximately 1/4 mile northwest of IH20. |
| Tarrant County, SH183 | 09-02-11 | 10' max width from
SP465 to Crosslands Rd in Fort Worth.
Crosslands Rd is located approximately 1/4 mile northwest of SP465. Fleetwood Logistics has blanket approval to travel in this restriction. They must have one escort when inside this restriction and over 10' wide. |
| Tarrant County, SH183 Portion of SH121 |
06-02-11 | 10’ max width from N.IH820
to FM157.
This restriction also affects SH121 where it is double signed with SH183. |
| Tarrant County, SH183 | 12-05-11 | 16’ max width and/or 65’ max
length for all turns to or from any road between SH199 and IH35W.
This restriction affects all turns to/from FM1220. This restriction does not affect any turns to/from IH35W. This restriction does not affect any turns to/from BU287. This restriction does not affect any turns to/from SH199. Trinity Industries/Logistics has blanket approval from the Fort Worth District to travel on SH183 for any load with an origin/destination between BU287 and IH35W in Fort Worth. This is a permanent restriction. |
| Tarrant County, SH183, Trinity Industries/Logistics blanket approval | 12-05-11 | Trinity Industries/Logistics has blanket approval from the Fort Worth District to travel on SH183 for any load with an origin/destination between BU287 and IH35W in Fort Worth. |
| Tarrant County, SH183 | 09-01-11 | 10’ max width from SP465 to Crosslands Rd in Fort Worth. |
| Tarrant County, Stewart St over SH199 in Azle | 11-21-11 | No width and/or no length
on Stewart St crossing over SH199.
This restriction also affects all turns to and from SH199 at Stewart St. This is a permanent restriction. |
| Tarrant County, FM1709 | 07-08-10 | 14’ max width from US377 to SH114. |
| Tarrant County, FM2499 SB to SH121 NB | 05-02-07 | There is no access from FM2499 SB to SH121 NB. |
| Tarrant County, FM2499 SB to SH26 SB | 05-02-07 | There is no access from FM2499 SB to SH121 SB. |
| Tarrant County, FM2871 | 04-26-04 | There is no access on the IH30 ML’s to/from FM2871. |
| Wise County, BU81 in Decatur | 02-07-08 | No permits from S.US287/US81 to N.US287/US81 in Decatur unless starting or stopping. |
| Wise County, US287 EFR SB to US287 ML SB | 01-23-09 | There is no access from US287 EFR SB (located south of SE.SH114 in Rhome) to US287 ML SB. |
| Wise County, US380 | 12-12-11 | In Decatur: 16' max width from FM51 to E.BU380. |
| Wise County, BU380 in Decatur | 02-07-08 | No permits from E.US380 to W.US380 in Decatur unless starting or stopping. |
| Wise County, FM51 Portion of BU81 Portion of BU380 |
09-01-11 | In Decatur: No permits from
US81/US287 to US380 unless the load has an origin or destination
here.
This includes the portions of BU81 and BU380 that are double signed with FM51. |
| Wise County, FM730 | 02-07-08 | No permits from US287/US81 to US380 in Decatur unless starting or stopping. |
| Wise County, FM1655 | 09-01-11 | 10' max width from US81/US287 to FM2265. |
| Wise and Jack Counties, FM1810 | 12-07-07 | Over 12' width must have a front escort from SH59 to FM2127. |
| Wise County, FM1810 EB to US81/US287 NB | 10-04-11 | No permits traveling FM1810 EB to US81/US287 NB. |
| Wise County, FM2123 | 12-28-11 | 10' max width from 3 miles west of FM51 to FM51. |
Page last updated December 28, 2011