TxDOT Expressway
Search:
   Home   |    Contact Us   |    Tools & Plug-Ins  
2004 English Special Provisions to Item 441 - Steel Structures (All)


SP441-008  PDF  RTF   - References AASHTO/NSBA S10.1 for erection plans, requires approval of erection plans and inspection of shore towers before beginning work. Replaces SP441-007 . (Change Memo: de-07-13). Statewide Use.
SP441-007  PDF  RTF   - Addresses the certification requirements for Level III personnel and adds a new section to allow for flux cored arc welding (FCAW) on web to flange welds. Required for all projects using Item 441 beginning with the January 2012 letting. Replaces SP441-006 .Replaced by SP441-008 . Statewide Use.
SP441-006  PDF  RTF   - This special provision reinstates weathering steel surface preparation provisions of Section 441.3.H.4. This reinstatement is intended to be temporary until AASHTO/NSBA Steel Bridge Collaboration (SBC) S2.1 2008 is published. Required for all projects using Item 441, ''Steel Structures'', beginning with the May 2010 letting. Replaces SP441-005 .Replaced by SP441-007 . (Change Memo: de-02-10). Statewide Use.
SP441-005  PDF  RTF   - Clarifies conflicts between this item and the referenced document AASHTO/NSBA Steel Bridge Collaboration s2.1, to follow the more stringent requirement. Required for all projects using Item 441, ''Steel Structures'', beginning with the September 2009 letting. Replaces SP441-002 .Replaced by SP441-006 . (Change Memo: de-21-09). Statewide Use.
SP441-004  PDF  RTF   - For project 0196-07-026 in Dallas County. At the completion of the structure, one set of prints of the corrected original working drawings shall be furnished to the Engineer. One-Time Use.
SP441-003  PDF  RTF   - For project 0196-07-026 in Dallas County. At the completion of the structure, one set of prints of the corrected original working drawings shall be furnished to the Engineer. One-Time Use.
SP441-002  PDF  RTF   - Changes: Inspectors certified; SAW heat input restrictions for reduced preheat; Remove requires for assembly of crossframes (441.3.G.); Remove bottom flanges from fascia (441.3.H.4.); Delete first sentence (441.3.B.5.c.); Correct error (441.3.D.2.) Required on all projects with Item 441 starting with the February 2006 letting. Replaces SP441-001 .Replaced by SP441-005 . (Change Memo: de-50-05). Statewide Use.
SP441-001  PDF  RTF   - Provides for the fabrication with ASTMA 709 Grade HPS 70W Steel. Required on all projects with Item 441 beginning with the January 2005 letting. Replaced by SP441-002 . (Change Memo: de-52-04). Statewide Use.

2004 English Special Provisions by Item (All)
Specification Information
Search For a Special Provision or Specification
 
spacer spacer
Disclaimer | Accessibility Policy | Privacy and Security Policy | Open Records | TxDOT Contacts